Big Tex 7 x 16 Low Profile Dump Trailer Scissor Lift

$10,499.00

The Big Tex 7×16 low profile scissor dump trailer (model 14LP-16BK6SIRPD) is the workhorse contractor dump in the longest single-axle-pull length most fleets run. The scissor lift gives even bed clearing on every dump (no sticking with wet aggregate), and the 24-inch 10-gauge sides plus 10-gauge floor handle abrasive loads better than thinner construction. Big Tex’s 14LP series is the most-stocked low profile scissor dump in the Eastern US for a reason: the spec hits every contractor checkbox without overcharging.

Spec highlights for this Big Tex low profile scissor dump:

  • 14,000 lb GVWR with 9,494 lb payload (4,506 lb empty)
  • 83-inch wide x 16-foot long deck, 24-inch sides (10-gauge steel)
  • Dual 7,000 lb Dexter axles, electric brakes
  • Hydraulic scissor lift, power up + power down (full hydraulic both directions)
  • 10-gauge steel floor, 12K jack, stabilizer jacks
  • 6-foot slide-out ramps, combo gate, tarp kit, spare tire mount, battery charger
  • ST235/80R16 radials, LED lights, D-rings, stake pockets

Best for daily-use landscape contractors, snow removal fleets, demolition crews, and equipment renters needing a 16-foot bed. Free nationwide delivery on every Big Tex low profile scissor dump trailer in our inventory.

SKU: PMT-CT6769 Category:

Specifications

GVWR 14,000 lb
Empty Weight 4,506 lb
Payload 9,494 lb
Deck 83 in. wide x 16 ft long
Side Height 24 in.
Sidewall 10 gauge steel
Floor 10 gauge steel
Axles (2) 7,000 lb Dexter
Brakes Electric on both
Tires ST235/80R16 radial
Lift Type Hydraulic scissor
Hydraulic Power up, power down (full both directions)
Coupler 2-5/16 in. adjustable
Jack 12K
Stabilizers Rear stabilizer jacks
Rear Gate Combo gate
Ramps 6 ft slide-out
Tarp Tarp kit included
Spare Tire Spare mount included
Lighting LED
Tie-Downs D-rings, stake pockets
Battery Charger Included
Model 14LP-16BK6SIRPD
Manufacturer Big Tex (Texas)

Scissor Lift vs Single Cylinder

The scissor lift system on this Big Tex low profile scissor dump tilts the entire bed evenly from front to back. That clears wet aggregate, sticky clay, and demolition debris more reliably than a single-cylinder telescopic, which lifts only the front of the bed. Higher dump angle (approximately 60 degrees vs 45 for single cylinder) means complete clearing on the first dump cycle. For daily commercial use, scissor is the upgrade contractors don’t regret.

What Can You Haul With This Trailer?

  • 3 yards of crushed stone or 5 yards of mulch (16-foot deck holds long-format material like landscape timbers and pipe)
  • Loaded skid steer (Bobcat S70 = 4,400 lb) plus 2-3 attachments via the 6-ft slide-out ramps
  • Demolition debris from a kitchen, bathroom, and roof tear-off
  • 9,000 lb of asphalt millings or RAP
  • Snow and ice-melt for plow operations

Free Nationwide Delivery

Most dealers add 600 to 1,800 dollars in delivery fees on a Big Tex dump in this class. PrimeLoad runs free-included delivery to all 50 US states, no exceptions, no fuel surcharges. East Coast and Midwest: 5 to 10 business days. West Coast and rural: 7 to 14 days. The driver hands over the title, keys, and bill of lading at the curb. Full shipping policy.

Frequently Asked Questions

Why pick the 16-foot length over a 14-foot?

The extra 2 feet of bed length matters most for hauling long-format material (16-foot landscape timbers, sheet goods, irrigation pipe, fencing). For volumetric loads (mulch, soil) you gain about 14 percent more capacity at the same width. For weight-limited loads (gravel, stone), the 14-ft and 16-ft hold the same weight but the 16-ft is easier to balance.

10-gauge floor and sides, why does it matter?

10-gauge is heavier than the 12-gauge or 14-gauge construction common at this price point. For abrasive loads (rock, RAP, demolition debris), 10-gauge typically lasts 2-3 years longer before warping or punching through. Worth the modest weight penalty.

What is the deck height?

This Big Tex low profile scissor dump has a 22 to 24 inch deck height (sits between the wheels). Easier loading via shovel or bucket compared to a 35-inch deckover style. Trade-off is bed width is 83 inches between fenders versus 84+ inches on a deckover.